Olearn 18x25mm Nylon Cable Carriers 1000mm Length

Olearn 18x25mm Nylon Cable Carriers 1000mm Length

This cable carrier is brige type energy chain, un-openable with ectangular cross section, defaul radius is R28. For more radius options, check the sheet below.          

Just leave a message if you need other dimensions for cable carrier.        

Please note, this cable carrier can't be open. The other type is close drag chain, if you need this one, please tell us.

MKS TFT28 V4.0 Color Touch Screen For Open Sourced 3D Printers

MKS TFT28 V4.0 Color Touch Screen For Open Sourced 3D Printers

You may think it's too hard to upgrade your standard Knob style screen on printer, but it's a simple thing to do by Olearn scourced MKS TFT28 V4.0 Color Touch Screen.
It's suitable for open sourced 3D printers and can work with Ramps1.4 & supports external DC 12V if compare to TFT32, TFT28. What's more it works with MKS Sbase, MKS Gen, MKS Base as well.
If you want a touch screen and something works easy, MKS TFT28 V4.0 will please you with the ability to add a wifi module, cloud printing, and you can take advantage of the custom boot screens through marlin. You just need to plug in to AUX 1 port and presto it's up and running, this screen has a lot of features to make the process of printing seamless and easy from your printer. The color is amazing and the very responsive to touch.

For other features, you can check below
-2.8 inch color touch screen , support U disk and SD card.
-Reserve WIFI interface，support WIFI function by adding WIFI module.
-Three themes, two styles, provide the users with more choices.
-Allowed to self-design the interface of booting logo and all buttons.
-Allowed to add at most 13 customized function buttons.
-Update the configuration and firmware by SD card, easily operate.
-Support Marlin, Repetier and Smoothieware firmware, and don’t need to modify the master program.
-Allowed to work with Ramps 1.4(TFT28) as well as MKS series controller board developed by Makerbase.
-Support “print from breakpoint” function,“print from power outage” and “filament detect” function.
-Support “auto off after printing finishes” function with “auto off after printing finishes” module.

Olearn PEI Sheet 0.2mm 3D Printer Build Surface

Olearn PEI Sheet 0.2mm 3D Printer Build Surface

If your guys have been used Anycubic Ultrabase which is a sheet of glass with a weird and mostly worthless coating on it. Well it work and it then it doesn't, so I think you need something different.

Olearn PEI material is great -- PLA sticks extremely well on CR-10s and other printers. The problem is attaching the adhesive to the PEI sheet is super challenging.  You are required to attach the adhesive to the PEI sheet and then attach the whole thing to your build plate. This is VERY difficult to do. Even though the gizmo dorks after you read install description on their website and watched youtube videos of people installing PEI sheets. It still may result in a huge bubble despite me using good technique and being very careful.

Why can't we attach the adhesive to the sheet before sending this out? It would be MUCH easier if the PEI sheet came with the adhesive attached. Once the adhesive is on the PEI sheet, attaching it to your build plate is easy because the PEI sheet is pretty rigid. The PEI sheet from OLEARN all are adhesived 3M paste before sending out!

Olearn Infrared Thermometer

If you guy have been tinkering around with electronics, robotics, 3D printers, that sort of thing, and you want to make sure you could keep an eye on the temperatures in various components. Something like dont want to set your motherboard on fire with a bad overclock! This thermometer does the job well enough,(you can get it from Olearn infrared Thermometer)and its measurements are mostly internally consistent. It's increadibly easy to use, it has a very bright targeting beam, and the read-out supports both Celsius and Fahrenheit with the press of a button.

The only complaint is that the thermometer might not be very very accurate like body thermometer, and it tends to report a few degrees lower than we think obeject actually are. For example, the 3D printer has sensors that measure the temperature of both the nozzles and the heated bed. When the nozzle thinks it's at 200°C， this thermometer might display anywhere from196°C~200°C. When the bed thinks it's at 60°C, the thermometer has read anywhere from 54°C~60°C.

But that is a consequence of infrared thermometers generally, or it's attributable to user error. Like above information, the range is relatively narrow and pretty consistent, so even though it looks like it's afew degree low, the thermometer still works well for your purposes. If you need accuracy down to a tenth of a degree, look elesewhere to be frankly, but if you're just keeping an eye to make sure you don't burn your house down, this one works great.

How to Assemble Titan Aro Extruder

To those who buy seperate parts from OLEARN, this short video will tell you how to assemble Titan Aro extruder, very clear.

OLEARN Filaments detection sensor

3D Technology Promote The Reform Of Auto Industry

3D printing technology will play more and more important role for auto industry or other in the near future, the manufacturer in the future will be applied with more industry 3D printer. And with the development of different 3D printer, the auto industry will be along with a great reform.  

The Application Of 3D printing technology in Auto Industry 3DThough the application for 3D printing technology in auto industry is still in primary stage, it has revolutionized the new technology.In 2014, The American Local Motors made a 3D print car-Strati with their own printing machine. In 2016，Honda launched a Micro-Commuter electromobile, print with 3D printer as well. Soon afterwards, many other auto companies try to print key components with 3D printer to control the quality, stable feature and short leading time. According to  a report 《Global 3D Printing Automotive Market Analysis & Trends - Industry Forecast to 2025）》, till 2025, the 3D printer application will increase 10%, most of them will be used for mobile car or truck’s components. 

The brief analyze for 3D printing technology At present, the auto industry has use different 3D print tech to meet their request including electron beam melting(EBM）、fused disposition modeling(FDM)、 laminated object manufacturing（LOM）、three dimensional printing、stereolithography、selective laser sintering(SLS）. Here take two technology as a brief introduction, show you below. 
Electron Beam Melting（EBM）


A new advance technology for melt form additive manufacturing，replace laser print head with E-beam. This tech. is used for incredibly dense metal parts usually. Technology Theory：First upload the 3D module of spare parts into EBM machine, and then tile the micro melt powder into EBM working bin. The E-beam can make melt powder into together with its high hi-density energy.Advance：1.The penetrability of E-beam is powerful 2. Fast and no deformation nearly 3. Vacuum to improve the quality of welding line 4. Easy to control Disadvantage：1.Complex machine and expensive 
2.Strict request for assembling and processing of plug 3.Limited space for vacuum bin4.The electromagnetic will affect the welding quality5. X-ray is harmful for human 

Fused Disposition Modeling（FDM）This is  additive manufacturing technology, it’s used for shaping and prototyping usually. FDM technology use high temperature to melt filament to liquid and through extruder of 3D printer head to print one layer by one layer. Advantage：high precision, high strength and can be printed colorful.  Disadvantage：the surface is roughly.


Due to the limited of the space, refer to other technologies, we can discuss should you have any interest to share.